Outer Rotor Fan Axial Fan with External Rotor Motor Wall Fan Volume 500

Overview

Basic Info.

Model NO.	YWF2D-200
Specification	200mm
Trademark	Jiayi
Origin	Wenlin, Taizhou City
HS Code	8414513000
Production Capacity	500PCS/Day

Product Description

Outer Rotor Fan Axial Fan With External Rotor Motor Wall Fan Volume
Product Description

Unlike conventional motors whose rotors are on the inside of a wound stator, external rotor motors have their rotor on the outside.
This presents unique advantages to the fan manufacturer and user as detailed below:
An extremely compact, therefore space saving unit, is produced by utilising the external rotor component as the hub of a fan
impeller.
Precision balancing is assured as the hub and impeller becomes one integrated unit of short axial length.
Heat is very effectively removed in the airstream, assisted by the fan impeller that acts as a rotating heat sink of appreciable
surface area.
Speed control is then possible by low cost voltage variation because the extra heat generated in the rotor under speed control
is lost directly into the airstream.
Air filters can be 'saved' when clean but 'air flow compensated' when dirty by the tendency of centrifugal fans to speed-up as
flow resistance increases. The increase in speed is more pronounced when using external rotor motors.
In general, the external rotor principle leads to small efficient motors, ideal for saving space within equipment.
EXTERNAL ROTOR FANS
Fans housing stator and windings inside the rotor are compact, well-balanced, with widely adjustable rotation speed and good
motor cooling. Built with insulation system (Class F) and integrated thermal protection. Axial fans are characterised by a series
of unique properties of being quiet, robust and thermal-shielding. Useful in all those situations in a system with low pressure
drop (therefore not very high resistance), the axial fans guarantee a large airflow rate.

Outer Rotor Fan Axial Fan with External Rotor Motor Wall Fan Volume 500-13000 M3/H

The external rotor axial flow fan has the characteristics of compact structure, convenient installation, reliable operation, low noise, energy saving and high efficiency. The products are widely used in hotels, restaurants, industrial and mining enterprises, office buildings, theaters and other building facilities, as ancillary equipment for freezers and cold storage or for ventilation and heat dissipation. (For example, it is matched with refrigeration equipment or facilities such as supermarket freezers, ice machines, air coolers, chillers, condensing units, etc., and used with dehumidifiers, evaporators, side wall fans, fire fans, central air-conditioning fans and other equipment).
The outer rotor axial flow fan is composed of fan blades, outer rotor motor, net cover, lead wire and other parts. The structure of the fan is calculated by structural finite element, and the strength check, modal analysis, harmonic response analysis and other methods are carried out to ensure that our products have the advantages of stable and reliable structure, high safety factor, small vibration, and strong anti-interference ability! According to customer requirements, Thermal protectors, junction boxes and other components can be installed, or different installation methods such as cylinder type and box type can be selected. The blades are designed according to the principles of aerodynamics, acoustic principles and acoustic performance requirements. They are twisted according to certain rules from the tip to the root. The material is made of high-quality steel or plastic. After dynamic balance verification, it has good starting performance, stable operation and low noise.
Our Advantages

Outer Rotor Fan Axial Fan with External Rotor Motor Wall Fan Volume 500-13000 M3/H

Detailed Photos

Outer Rotor Fan Axial Fan with External Rotor Motor Wall Fan Volume 500-13000 M3/H

Product Parameters

^Model	Rated voltage (V)	Frenquency ( Hz)	Current (A)	Input power (W)	Highest speed(r/min)	Volume (m3/h)	Pressure (Pa)	Noise db (A)
YWF2E-200	220	⁵⁰	^0.3	70	²⁶⁵⁰	¹⁰⁵⁰	120	⁵⁶

Outer Rotor Fan Axial Fan with External Rotor Motor Wall Fan Volume 500-13000 M3/H

This series of fans is composed of external rotor single-phase capacitor running asynchronous motor or three-phase asynchronous motor, double flange cylindrical casing, grid frame and fan blades. It has excellent performances such as large air volume, low vibration, low noise and reliable operation. The fan is mainly used for ventilation and heat dissipation in industries that require large air volume, such as ground automatic control devices, large electronic equipment, medical equipment, computers, office supplies automation, and electric welding machines. It can also be used for ventilation, ventilation and purification in buildings and workshops.Installation dimensionsCompany Profile

Zhejiang Jiayi Fan Co., Ltd. was established in 2003. It is a modern private enterprise focusing on the research, development, production and sales of ventilation equipment. The company is headquartered in Daxi Town, Wenling City, Zhejiang Province, which is the "Hometown of Pumps in China", and has branches across the country; the production base is located in the East New District of Wenling City.

The main products of the company: all kinds of portable, mobile, oil-proof and moisture-proof axial flow fan series; medium, low and high pressure centrifugal fan series; boiler type draft fan series; mixed flow, diagonal flow fan series; industrial exhaust fan series; blower series and Y series; air compressor series and three-phase asynchronous motor, etc.; and can design and produce various non-standard and special exhaust equipment and special fans according to customer requirements.
Sincerely thank domestic and foreign customers for their long-term trust and love for A and B fans, and welcome you to visit and guide us at any time. With your support, we are more confident to manufacture ventilation equipment products that meet the needs of social development. Let us work together, help each other, coexist and prosper, and create unlimited business opportunities.

Packaging & ShippingFAQ

Q1: What's the terms of trade?

A1: FOB,CFR,CIF or EXW are all acceptable.

Q2: What's the terms of payment?

A2: T/T,L/C at sight or cash.

Q3: How long is your delivery time?

A3: Generally it is 5-10 days if the goods are in stock or it is 20-30 days if the goods are not in stock, it is according to quantity.

Q4: What is the advantage about your company?

A4: Our company has professional team and professional production line.

Q5: If we travel to China to checking your facility, are you welcome?

A5: Of course, We will provide the whole accompany upon your arrivial. Warm Welcome!

Q6: How Many Years of your company working in this industry?